Tips for Office Safety
Accidents in the workplace are a fairly common occurrence, resulting in mutilation, death, and lifestyle-altering accidents. For the most part, these accidents stem from falls, however, other causes factor in. Great consideration is given to ergonomics, arranging the environment, or adapting the job to fit the worker. Ergonomics help to eliminate many potential injuries and disorders associated with the overuse of muscles, bad posture and repetitive motion.
Falls:
- Always use a ladder or step stool to retrieve anything above shoulder level.
- Ladders, or step stools, should be sturdy and not have any broken rungs or legs.
- Do not lean too far back in chairs. This may result in over-balancing and a fall.
- Never use ladder substitutes such as chairs or boxes.
- Be sure the pathway is clear before you walk.
- Secure electrical cords and wires away from walkways.
- Avoid excessive bending, twisting, and leaning backward while seated.
Filing Cabinets/Bookcases:
- Fill the second drawer from the bottom in a four-drawer filing cabinet before any of the others, to weight the bottom and to prevent it from tilting over.
- Return drawers and doors to the closed position after use to prevent bumping and tripping. Never open more than one drawer or door at a time.
- Place file cabinets where their use will not interfere with traffic patterns.
- Secure cabinets or bookcases taller than 64 inches to the wall to prevent toppling over.
Electrical Equipment:
- Frayed electrical cords, loose or broken electrical wires, broken outlet covers and receptacles, and worn or broken electrical plugs are dangerous and should be repaired or replaced before being used again.
- Moisture and electricity do not mix. Placing liquids on or around electrical equipment (such as computers, radios, copiers, printers or microwaves) increases the risk of electrocution if the liquid spills and gets into the electrical equipment. This includes wet or sweaty hands.
- Do not block electrical panel doors. If an electrical malfunction should occur, the panel door and anything else in front of the door will become very hot.
- Electrical panel doors should always be kept closed, to prevent “electrical flashover” in the event of an electrical malfunction.